How to maintain mini planetary gearbox wholesale?

Comments · 0 Views

mini planetary gearbox wholesale https://www.dydzmotor.com/36mm-mini-planetary-gearbox.html

mini planetary gearbox wholesale is a power transmission mechanism that uses a gear reducer to slow down the speed of the motor to the required speed and obtain a larger torque mechanism. In the current mechanism used to transmit power and motion, the reducer has a wide range of applications. It can be seen in almost all kinds of mechanical transmission systems, from ships, cars, locomotives, heavy machinery and tools used in construction, processing machinery and tools used in the machinery industry and automated production equipment, to common household appliances in daily life, clocks and so on. Its application from high-power transmission work, to small load, precise Angle transmission can be seen the application of the reducer, and in industrial applications, the reducer has the function of slowing down and increasing torque. Therefore, it is widely used in speed and torque conversion equipment.

In order to ensure the assembly accuracy of the mini planetary gearbox wholesale, the installation does not need to start the motor and does not destroy the sealant. Open the oil cover or clean the anti-rust grease on the gear surface with kerosene (diesel) to check. Between the mini planetary gearbox wholesale and the connecting parts such as the motor or the main engine, the elastic coupling can also be used to connect the gear shaft or other non-rigid coupling. The installation of the mini planetary gearbox wholesale should be smooth and firm, and the base adjustment gasket must be solid (choose steel gasket). The coaxiality deviation from the coupling should not be greater than the allowable value of the coupling used. Check whether bolts on sealing surfaces of containers are loose. If it loosens, tighten it again.

Use and maintenance Load tests must be carried out before the mini planetary gearbox wholesale is officially used. Before the load test, lubricating oil should be added according to the oil mark position, and the output shaft should be turned by hand to make it rotate. It must be flexible and then run for two hours without any abnormal noise. Load test should be gradually loaded to full load (conditions should be in 25%, 50%, 75% and full load) four stages, each stage of the running time of not less than 2 hours, should be stable without shock vibration and oil, and discharge the lubricating oil in the machine to determine no fault or with 200 mesh filter oil can be used. If there is any abnormal situation during the test, the cause should be identified and excluded, and the manufacturer should be notified immediately. The mini planetary gearbox wholesale is inspected semi-annually. After that, the tooth surface should be checked regularly (weekly) for pitting, wear, bonding and other defects. If the defect area along the tooth length and tooth height direction is greater than 20%, the gear pair should be replaced. The gear adopts two forms of oil pool lubrication and circulation lubrication, and the lubricating oil is selected according to the equipment instructions. Soft and medium hard gear surface motor N100 ~ 150, hard gear surface motor N220 ~ 320. Lubricating oil should be checked and replaced regularly. When the newly installed speed regulating motor is used, the new oil must be replaced after 10-15 days of operation. After that, the quality of the oil should be checked regularly (2-3 months). If found not meet the requirements, should be replaced immediately. Generally, the oil should be changed at least every six months. When detecting the quality of lubricating oil, the lubricating oil must be replaced in time if one of the following situations occurs:

The daily maintenance of mini planetary gearbox wholesale is mainly to check whether there is oil leakage, timely check the liquid level in the box, whether the lubrication is good, whether the screws are firm and intact, regularly check the temperature of the equipment, bite into the meshing position of the gear with the guide wire, and measure the wear of the teeth.

mini planetary gearbox wholesale https://www.dydzmotor.com/36mm-mini-planetary-gearbox.html

Read more
Comments