The following content mainly introduces the operation instructions of arc blade hedge trimmer and its attention details, you can take a look, this is the company's new launch of a large-caliber arc blade hedge trimmer can solve your problems.

Operating instructions:

1. Open the special backpack and place the arc blade hedge trimmer and battery into the corresponding storage bag

2. Pass the arc blade hedge trimmer fixed connection power supply through the backpack and connect it to the battery, and wear the backpack (insert the scissors power cord into the designated fixing buckle of the strap to prevent cutting the wire during use).

3. Take out the arc blade hedge trimmer, turn on the battery power switch, and a "drip" sound will be emitted, indicating that the battery is normally powered

4. Quickly pull the trigger two to three times, the blade will automatically open

5. Before work, pull the trigger to let the blade run several times, listen to whether there is a noise or too fast too slow phenomenon

6. Start to work after normal

7. Blade opening size conversion: press the trigger, and when you hear the second sound of "drop", release the trigger immediately, and the blade opening size will automatically convert.

8. Shut down: Changan trigger, when you hear the sound of "drop drop" three times, release the trigger, the blade automatically closes

9. Turn off the battery power switch

Attention:

(1) During the long use of the machine, the heat of the grip is a normal phenomenon, please rest assured

(2) After the pruning work is completed this season, or when the blade is replaced, it is necessary to disassemble the blade and add lubricating oil between the blades for maintenance.

arc blade hedge trimmer https://www.keylead.cn/Electrical-Hedge-Trimmer-Arc-Blade